How do I use syringe pump? Is it convenient to use the syringe pump, the following syringe pump manufacturers will introduce you to the use of the syringe pump.

　　First of all, the first point is to turn on the power supply of the syringe pump and turn on the switch of the syringe pump;

　　The second point is to set up the injection program of the syringe pump, including the injection speed and injection volume of the injected liquid;

　　The third point is to select any brand of syringe to be used (the general syringe pump can use the syringe produced by any manufacturer), according to the syringe specifications required by the syringe pump brand, use the syringe to extract the liquid, empty the air, and then fix the syringe in the syringe fixation tank of the syringe pump, and connect the corresponding catheter and intravenous channel.

　　After the storage is ready, at the fourth point, press the start button to start the injection administration.

　　Fifth, after the injection is completed, pull out the needle, turn off the power, and wipe the syringe pump for the next use.

　　What precautions should I take when using Syringe pumps?

　　1. If there is an alarm when the syringe pump is used, the alarm should be eliminated in time, and the common alarm situations are pipeline blockage and liquid medicine exhaustion;　2. When the syringe pump is used, the venous channel should be clamped first, the operation of the syringe pump should be suspended, the syringe should be taken out, and the syringe should be placed in the fixed groove of the syringe pump after the replacement of the liquid medicine is completed.

　　3. The ambient temperature of the syringe pump should be < 45°C, and the operation of the syringe pump should be stable at this temperature.

　　4. The injection running rate of the syringe pump should be set in the range of 0.1-100ml/h.

　　5. When installing the syringe, do not rotate the clamp and slide the propeller vigorously to prevent too much liquid medicine from entering the body.