Apply the informing procedure for intravenous infusion pump injections

　　1. The nursing staff first informs the patient and his family: in order to accurately control the infusion speed, the nurse will use the infusion pump to give the patient intravenous infusion according to the doctor's instructions.

　　2. The nurse introduces the purpose of the injected drug, the name of the drug, the dosage, the effect, and the precautions when applying the drug.

　　Three: the nurse to the patient to briefly explain the working principle of the infusion pump, the infusion pump is the use of machinery to push the liquid into the blood vessels of the electronic instrument, the advantages of this infusion pump is uniform infusion speed, accurate infusion, safe use.

　　4. After the injection, the nurse explains the amount and speed of infusion to the patient and family.

　　5. In the process of using the infusion pump, there may be alarms, and the common reasons are: bubbles, blockage of the infusion pump, end of infusion, etc. During the infusion, the nurse will make regular rounds. If the above situation occurs, the patient is requested to turn on the signal light in time for timely treatment.

　　6. Patients and family members should not move the infusion pump at will to prevent the wire of the infusion pump from falling off due to traction.

　　7. Do not move the patient's infusion limb vigorously to prevent the infusion tube from being pulled out.

　　Eight: Inform the patient that there is a battery in the infusion pump, so if the patient wants to go to the toilet, he can ask the nurse to temporarily unplug the power cord and plug it in when he comes back.

　　9. Nurses should assist patients in nursing their lives during the infusion process.